LCBTP03003

Mobile phone battery repair method

Posted by admin on January 12, 2010
battery knowledge / No Comments

When your phone time to use shorter VGP-BPS10 VGP-BPS8 battery (memory effects or aging), you need a battery to replace it?

 

The next time you encounter this situation when you save your money, you say a very effective way to test:

 

1, the battery in the newspaper before being placed in plastic bags, wrap well into the freezer for three days (the logs can absorb excess moisture)

 

2, three days after the transfer of two days at room temperature

 

3, two days after charging the battery, mobile phone charge saturation test wrap yellow (estimated to save 80% -90%).

 

The information revealed by the well-known manufacturers’ engineers’ battery, according to a friend pointed out that the effects tested to be effective. Like any effect, anyway, the 346970-001 367759-001 battery faster useless, but everyone has a refrigerator, ladies and gentlemen may want to try it!

 

I try to explain! This method is not my own creation, is the professional way! May we wish to try!

 

Battery Internal battery fluid, because the battery aging, because the liquid solidified lead battery. The solution is to put the battery low freezing temperature, so that the liquid solidified battery, let it melt naturally, drawing excess water, then fully charge the battery fluid to all assets, fair another new.

 

Really very helpful in giving you a reference!

 

A popular recipe for lithium current fixed telephone line-testing methods of ion battery!

 

Cell phones are now used in our daily life, electronic products used most frequently, and walk in the street, almost irrespective of young and old, rich or poor, nearly one or more labor, as I remember when he no longer get those bags of money a “Big Brother” so that those areas. But tell the truth, now that the popularity of mobile phones, and indeed the link is to make life more comfortable. Dell Inspiron B120 battery  Dell Inspiron B130 battery

 

I started using mobile phones to now she has replaced all four, and an early monochrome screen Motorola Samsung Anycall, was recently replaced by another Nokia N95, more functionality and use of cell phones have become increasingly frequent Consequently, the cell phone battery is a test, and take the N95 I use the example of this bar, every day is an hour or a normal voice calls, send text messages, then the time is probably ten to twenty minutes, of course, songs and games, is almost an hour, it probably also be able to adhere to three days or less.

 

A few days ago the battery in the search for information online and found a lot about the restoration of the position of the old battery, just wanted to come to his house and several of these batteries are old machines at rest, it introduced a better test, but also a look at these methods in the end is not feasible. A1078 A1175

 

The first is the freezing method: close to limit the use of mobile phone batteries in the refrigerator, freezer for three days, a chance to continue to use, battery life longer than the pre-frozen! This is the latest rumor on the Internet fix old battery, I will introduce the first of this surgery !

 

Motorola to first find the battery, this machine is still seven years ago, V70, a rotating screen, now he can give a child a toy, and inside the battery is original, and End CECT load placed over two days is probably no electricity, and remove the battery with two layers of plastic wrap and two layers of paper bag, which is hygroscopic moisture, Fang Bingxiang cold freezer for three days, then remove the packaging and then dried for two days, charging the phone that the mobile phone of the third day without electricity only at night, it seems that this approach is really having some effect.

 

This approach to online professional explanation is as follows: mobile phone battery loading and unloading process is a process in the meantime, the battery in the yin and yang with the other to pay the amount received. The reason the battery will be more and more without the use because the normal room temperature, the electron kinetic energy in the relatively large, and the battery is in an active state, where the leak is relatively frequent. But the PA3399U-1BAS PA3399U-1BRS battery in the mid to low temperature, the surface of the lithium electrolyte membrane and the micro-structure, and their interfaces are changed significantly, leading to cells in assets temporarily to reduce the current drain, if the charging, cell phone to be switched on time will increase.

 

For this interpretation, I am not a physics does not know the right end wrong with that.

 

The second argument, using an eraser wipe the batteries of mobile telephones and cellular telephone contact with the surface of contact with the metal, allowing the use of the situation of mobile batteries is a great good.

 

This principle is still relatively easy to understand will be a long time to surface oxidation of metals, a natural touch to close to the battery also used for short time. I use my mobile phone batteries Samsung to do experiments, do not use an eraser, and found sandpaper polishing, folded in half, using the tips of cell phone battery touch of polished brass few films, then wipe clean sheet again fully discharge and then charge the battery than the original multi-purpose room of the day, it seems that there are still effects.

 

A third argument is given near the demolition discharge the battery completely, then recharge the battery is activated. BATBL50L6 LCBTP03003

 

This does not seem many people have tried, I happen to have a battery backup is an old Samsung mobile phone battery may be used improperly, the base will be less than one day is left to rest in a drawer are more than two years. I was looking for a two-wire, connected to a small 1.5 volt bulb, and then received a wire at both ends and then the battery positive and negative, light bulbs reluctantly gave a little light, lasted less than half an hour, the bulbs will be brighter, rechargeable, but also more specifically in charge for two hours on the phone, this time to maintain more than one day before the black cell phone, and if this kind of method is still capable of quite useful.

 

Three kinds of methods, 11 had tried the first two are relatively easy, my friends, you can try in a test, but that said, the rich friends might think this is very troublesome patch, think about mobile phones is relatively commodity is relatively expensive and a thousand dollars to buy a cell phone, buy 12 saving high-performance battery-May be more realistic, original electric Xiangui, then the power of the brand is actually quite made a good choice. I am now in addition to original Nokia batteries purchased a block away from the Hong-yi, and with them I felt the original sounds like there is not much difference. Two batteries in hand, met a traveler also no longer need to worry about what Shoujimeidian. FRU 92P1141 40Y6799

 

Well, writing a lot, but his conclusion that the experiments, we also tried if these measures are welcome to come to Gent, the results of the experiment, or have a better way, they might as well share it!

Tags: , , , , ,

Purchase and maintenance of electric bicycle battery

Posted by admin on December 30, 2009
battery knowledge / No Comments

1. Elements of a battery option

 

AGM battery with a low cost advantage of large discharge current, but there is a narrow range of temperature, the VGP-BPS2A battery easy to dehydration and heat control deficiencies and gel batteries are expensive, but it was stable performance, range of temperature, resistance to more than off-load discharge, long life and so on.

 

As battery electric bike, in most cases, are high current, depth of discharge cycle, therefore, better adapted to use electric bicycle batteries gel batteries. Gel batteries are highly resistant to over-discharge capacity and high electro-hydraulic retention, excessive discharge of the battery to avoid the impact due to dehydration caused by thermal runaway phenomenon of generation of cells.

 

Rechargeable lead acid batteries of different brands are basically the same characteristics, but because the manufacturers of the formulation of the battery material, electrolyte concentration and content of Deng Jun different charging voltage are also some differences, therefore, strictly speaking, should be based on the manufacturing of batteries given specific requirements for determining the charging voltage of the PA3399U-1BRS battery program, otherwise easily lead to misuse of the battery.

   

Motor bikes and electric power output of batteries to match the power rating, so in order to prolong battery life, power bicycle motor to the extent possible, the battery is less than the nominal power to avoid the battery at full load or overload of work long-term conditions.

 

2, the efficient use of battery

 

The battery used in tandem, if the internal resistance of the battery is incoherent, in the process of loading and unloading the voltage across the battery would be inconsistent with any group that will eventually lead to premature failure of the pile because load. Therefore, electric bicycle, the consistency of the balance of the battery, the battery has a considerable impact. For consumers, fair use, but also on the balance of the consistency of the battery to some extent, affects the battery life. Based on the battery during the years of research and actual use, we recommend consumers to use the following methods of rational use A1060 batteries;

(1) Electric Juji line speed: 20-25km / h.

  

(2) Riding distance: 10-30km per day, depth of discharge less than or equal to 70% (once every 2 months, deep discharge).

   

(3) the load frequency: once per day.

 

(4) Charge: Ride single (which can carry a 10-year-old child under one).

 

According to the above method, good quality electric bicycles can be made in the normal use of 3-4 years or five years, and can use a battery and a half years or both. The depth of lower depth of discharge of the battery, the life cycle of the battery cycle longer battery life longer. Therefore, consumers are generally regarded as one of a charge cycle is wrong, to make their own use to prolong battery life, we must always leave the battery is fully charged state, a state of an extended power outage, the negative battery vulnerable to salinization, resulting in loss of LCBTP03003 battery capacity, affecting the battery life.

 

3, the battery maintenance

 

Qualified electric bike batteries manufactured by the manufacturer of the battery, the battery life and performance to some extent depend on consumer use and maintenance.

 

(1) Matching and battery charger.

 

Batteries for electric bikes is a bad charge, rather than harm, we can see the importance of matching chargers and batteries, there are two situations: first, the new charger and battery manufacturers to ensure their own settings do not match, the second is the load device itself, poor quality components, the beginning of use, fairly matched, that the burden of consumers and discharge cycles to use, the charger itself same is due to temperature, aging of components, where the charge voltage and switch current drift, the FK890 battery is damaged.

 

And manufacturers of electric vehicles recommend that consumers buy the best manufacturers corresponding battery charger, not because of momentary greed expensive rechargeable batteries bad, but not worth the candle.

 

(2) regular, rapid recovery of electricity.

 

Consumers in the statement on the use of life cycle is usually nominal, there is a misconception that to recharge a battery, the battery reduces the time, so whenever the consumption of battery power, as voltage protection for the controller began to add electric 31.5V did not know that this does not only fail to protect the battery, but also shorten the battery life. So, remind the majority of consumers, if possible, promptly complete the F4812A battery.

 

(3) Non-LED displays the voltage, to continue riding. Some consumers in the half-way ride, indicators show the state of tension, after taking a rest and then a way of riding, so much wrong with the battery, the battery will discharge in a serious salinization or generate sticks of lead crystal, so that short-circuit the battery, which affect life expectancy.

 

(4) electric bike is just beginning, climbing, overloading should try to help.

 

(5) on the road the rain, they should avoid wetting the switches and connectors to prevent leaks.

 

More knowledge about battery used lead acid batteries for electric bicycle maintenance and repair has a positive side, thanks to technological improvements, including improved technology to freeze the current cost – effective lead-acid batteries with other batteries of a great advantage over.

Tags: , , , , ,

Correctly view the iPod battery status, charging for the iPod

Posted by admin on December 28, 2009
battery knowledge / No Comments

Focus: If the computer or laptop into standby, hibernation or sleep mode, then the iPod will stop charging. To recharge your iPod, set it directly connected to the USB port on the computer, and ensure the closure of standby, hibernation or sleep mode.

Note: If you use a laptop, will ensure that the power supply connected, and keep the lid or display is open. If the lid is closed, then the computer may enter standby, hibernation or sleep mode, so the iPod LCBTP03003 can not be properly loaded.

 

Tip: If you have an Apple iPod USB Power Adapter, then you can not open the computer case power supply to charge your iPod.

 

 Improper conduct charge

 

In some cases, some may look like the iPod does not load in the load, while in practice. Or, you may think that your iPod in the charge actually did not pay:

 

If you use Windows 2000, then after syncing the iPod that it may stop charging. Please refer to document 304801 “iPod: The correct charge for Windows 2000 process steps to ensure the iPod to maintain the load.

 

If the computer or laptop in standby mode, then the iPod will stop charging. Please disable sleep mode and ensure that the laptop connected to food.

 

When you use the USB 2.0 hub for connecting iPod nano to the computer, the charging indicator power may show a slower pace. It is an illusion does not mean that the rate of charge iPod nano is in decline.

 

If the iPod nano, fifth-generation iPod or iPod mini (Second Generation) apple A1060 battery completely without electricity, then the charging icon will no longer display the animation, you may wait 10 minutes, the computer can recognize. Click here for additional information.

 

When you launch iTunes from the iPod nano and keep it with the port USB 2.0 connection, in the process of charging the battery indicator at the top of the screen may not display animation. If you see the indicator on the battery with lightning, then the iPod nano is charging instructions.

Charge for your iPod

 

You can connect the iPod to the Apple iPod power adapter, or connect to a computer port high-power USB or FireWire port for your iPod battery.

 

Power Adapter

 

If you use the Apple iPod Power Adapter, then please use your iPod with a USB or FireWire cable to connect your iPod to the adapter. Then, insert the adapter into the outlet to work. Adapter can be purchased at the Apple Store.

 

Computer

 

If you want to use your computer to charge your iPod, then verify that the computer is open, not in sleep mode (please refer to the computer’s operating manual to learn how to disable the standby mode) and make sure you connect the iPod to the USB or FireWire port available electricity. If you use a USB adapter, so please use your iPod with the USB cable (or Apple-branded cable) to connect the iPod to a high power port. High power USB port is usually provided by the computer itself, rather than the keyboard provided on the keyboard USB port is a little energy.

 

Note: If you use a laptop, then please ensure that the plug on power, and to ensure that the lid or display is opened, because the lid closed May cause the computer to sleep , hibernation or sleep mode, allowing iPod can be charged.

 

All Macs and some PCs FireWire port is to provide electric power. If you only have 4-pin FireWire port, and may not be able to provide electricity. If you use a FireWire port, then please use your iPod with a FireWire cable (or Apple-branded cable) to connect the iPod to the FireWire port on the computer.

 

Once connected, your iPod apple M8403 battery can be responsible for approximately 1 hour in 80% of the electricity consumption of about 4 hours at full load (charging time may vary depending on machine model to vary – dependent the iPod nano to 80% of the electricity needs of 1.5 hours, fully charged Zexu about 3 hours, fifth generation iPod charging to 80% of the electricity needs of two hours, fully charged Zexu about 4 hours) . Until the battery is fully charged, you can disconnect the connection to use an iPod, you do not have to wait until the battery is fully discharged before recharging. This is because the lithium-ion batteries like the iPod does not come with rechargeable nickel as well as memory function.

 

Stop after the battery is fully charged, so if you do not have to worry all night to power (power is still attached iPod does not keep its costs). Once the battery is fully charged (the battery icon stops animation), please disconnect the iPod connection. If you use a computer to recharge the iPod, then please ensure that the correct charge is complete, disconnect iPod connection.

 

More information to charge the battery, please refer to the “iPod User’s Guide.” To learn more about iPod batteries for more information, please consult the relevant contents of the iPod Battery FAQ.

 

How can I see the battery status?

 

upper right corner of the iPod screen will display a battery icon to show the approximate remaining power. If the process of charging the iPod in sleep mode, then the center of the screen will display the same icons wide. Click here to learn how to display the battery power of iPod shuffle.

 

Use iPod Dock

 

iPod nano, Fifth Generation iPod, iPod photo, iPod (dock connector), iPod (Click Wheel), color screen iPod mini and the iPod can be found in his VGP-BPS13B/B cell on the charge, provided meet the above conditions can be loaded by a computer. Make sure iPod Dock connected to your computer with a high-power USB or FireWire port, or connect to the iPod adapter.

 

IPod charging in foreign countries to issue

 

If you live abroad, the situation is the cause? Abroad, you can do to recharge your iPod? Absolutely. Apple iPod Power Adapter for power in the world using a common standard. To avoid trouble, please consider buying World Travel Adapter Kit, you can ensure that in the case of a variety of holds, you have the appropriate plugin. The tool also applies to most of the iBook and PowerBook G4 AC Adapter.

 

Warranty Information

 

If your iPod has been more than Apple years limited warranty or the AppleCare Protection Plan for iPod, then you need to protect external program of replacement apple MacBook Pro 15 inch battery to pay for a replacement battery. Please refer to Program Replacement iPod Battery for more information.

Tags: , , , , ,